JCB 411 wheel loader
Józefów
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
+48 791 90...
+48 791 900 886
1,500 kg
Poland, Grodków
Poland, Nowy Sącz
5,500 kg
Poland, Rakoniewice
4 m
Poland, Sierakowice
Poland, Księżyno
2.49 m
Poland, Modliborzyce
2,200 kg
Poland, Rakoniewice
6,000 kg
Poland, Zduny, Wielkopolskie
Poland, Łomianki
5,000 kg
Dumping height
4.4 m
Poland, Opalenica
Poland, Radocza
Poland, Łomianki
Poland, Grębocin
Poland, Ostrowiec Świętokrzyski
1,600 kg
Poland, Wasilew Skrzeszewski
Wheelbase: 2,750 mm
Overall length including bucket: 6,229 mm
Overall height: 3,057 mm
Ground clearance: 344 mm
Engine
JCB EcoMAX T4F Tier 4 Final four-cylinder turbocharged diesel engine with an output of 81.3 kW (109 hp), maximum torque of 516 Nm and a displacement of 4.4 litres, liquid-cooled.
The engine technology does not require the use of a diesel particulate filter (DPF). The engine is equipped with an AdBlue system.
Drivetrain
Four-wheel drive (4x4), automatic ZF 4WG115 transmission with manual gear-shifting option. 4 forward gears and 3 reverse gears.
JCB PD70 axles. Oscillating rear axle: ±11.0°.
Braking System
Service brakes: hydraulic, multi-disc, oil-immersed brakes acting on all four wheels.
Parking brake: electric, acting on the output drive shaft.
Hydraulic System
Two multi-piston pumps with flow rates of 50.6 l/min and 72.6 l/min and a maximum operating pressure of 230 bar.
Emergency steering system backup.
Steering and Controls
Articulated steering providing excellent manoeuvrability and turning capability.
Loader control cut-off system increasing safety during machine travel.
Electrical System
Electrical system: 24 V
Alternator: 100 Ah
Two high-capacity batteries: 2 x 110 Ah
Electrical cables protected against moisture and enclosed in protective sheathing.
Loader Performance
Operating weight: approx. 8,750 kg
Maximum load when travelling straight ahead: 6,392 kg
Maximum load at full articulation (±40°): 5,451 kg
Load for optimum machine operation: 2,726 kg
Maximum horizontal loading height: 3,346 mm
Maximum dump height at a 45° bucket angle: 2,718 mm
HT-type loader arm providing very high lifting torque throughout the entire lifting range.
Travel Performance
Internal turning radius: 2,658 mm
Smooth Shift Powershift automatic transmission.
Fluid Capacities
Hydraulic system: 155 l
Fuel tank: 116 l
DEF tank: 20 l
Standard Equipment
ROPS/FOPS cab equipped with heating, three-speed fan, heated fully adjustable operator's seat, adjustable steering column, heated rear window, front and rear work lights, road lights, front and rear windscreen wipers, sun visors, interior lighting, electronic control panel with LCD text display.
Automatic engine speed reduction when the operator is inactive.
Intelligent clutch – a function that disengages the drivetrain depending on the degree of brake pedal application.
Reversing camera.
Cab
Reduced noise level in the cab – 68 dB(A).
Maximum operator space and comfort.
Controls positioned and optimised for maximum operator comfort and ease of use.
Operator's seat made from high-quality, easy-to-clean fabric with increased resistance to scratching.
Main LCD computer display providing a clear and easy-to-read instrument panel.
Air-conditioning system.
Heated front and rear windows provide rapid moisture removal and defrosting.
Fully adjustable steering column.
Front dashboard equipped with deep storage compartments and a cup holder.
Attachments Included
Forks and bucket included.