Ingersoll Rand D480EC-A stationary compressor
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
+49 162 5858448
Germany, Egenhofen
Germany, Niederlangen
Germany, Hückelhoven Baal
Germany, Egenhofen
Germany, Niederlangen
Germany, Dabergotz
50 Hz
Germany, Bergisch-Gladbach
Germany, Bielefeld
Belgium, Waregem
50 Hz
Germany, Bergisch-Gladbach
Belgium, Waregem
Germany, Location:hanover
Poland, Goświnowice
Germany, Freiberg am Neckar
50 Hz
Germany, Egenhofen
Auction
Germany, Meppen
Auction
Germany, Meppen
Location: DE
Machine Type: Oil-Flooded Rotary Screw Air Compressor (Total Air System / TAS Configuration)
Nominal Power / Input Shaft Power: 30 kW (40 HP)
Maximum Allowable Working Pressure: 9.6 bar (138 psi)
Flow Rate / Air Capacity (FAD): ~4.7 - 5.2 m³/min (164 - 184 CFM)
Motor Speed: 2970 rpm
Electrical Supply: 400 V / 3 Phase / 50 Hz
Gross Mass / Package Weight: 1150 kg
Sound Level: 69 dB(A)
Integrated Features: Xe-70M Microprocessor Controller, Integrated Refrigerated Air Dryer, Moisture Separator, Dual-Stage Coalescing Air Filters, Heavy-Duty Pre-Filters, High-Efficiency TEFC IP55 Main Motor
Piping Connections: 1.5" NPT Discharge
Installed Motor Capacity: 37 kW
Stage Pressure: 13 bar
Debit Volume / Air Flow Capacity: 6,90 m³/min
Suction Pressure: 1,0 bar
Full Load Current: 81 A
Air End Model: EK140NK
Version: V4
Voltage / Phase / Frequency: 400V / 3 Ph / 50 Hz
Compression Medium: Luft
Electrical Power: 1,77 kW
Power Supply: 230V / 1 Ph / 50 Hz
Coolant / Refrigerant: R407C (1,70 kg)
CO2 Equivalent: 3,016 t
Ambient Temperature Range (TS): +2 / +50 °C
Compressed Air Operating Temperature Range (TS): +5 / +60 °C
Compressed Air Maximum Operating Pressure (PS): 16 barg
Low Pressure Range (LP): 15 / 52 °C (20 barg)
High Pressure Range (HP): 10 / 120 °C (30 barg)
Volume: 2000 Litres
Maximum Allowable Pressure (PS): 10 bar
Test Pressure (PT): 14.3 bar
Minimum / Maximum Allowable Temperature (TS): 0 / 50 °C
Minimum Allowable Pressure (PS): 0 bar
Minimum Allowable Temperature (TS): 10 °C
Maximum Allowable Temperature (TS): 250 °C
Volume (V): 71 L
INGERSOLL RAND RS30i-A9.6-TAS
INGERSOLL RAND RSE37n-A13
Machine Type: Rotary Screw Air Compressor
Motor Speed: 3600 rpm
INGERSOLL RAND D600EC-A
Machine Type: Compressed Air Refrigeration Dryer
INGERSOLL RAND D480EC-A
Machine Type: Compressed Air Refrigeration Dryer
Electrical Power: 1,77 kW
Power Supply: 230V / 1 Ph / 50 Hz
Coolant / Refrigerant: R407C (1,20 Kg)
CO2 Equivalent: 2,129 t
Ambient Temperature Range (TS): +2 / +50 °C
Compressed Air Operating Temperature Range (TS): +5 / +60 °C
Compressed Air Maximum Operating Pressure (PS): 16 barg
Low Pressure Range (LP): -15 / 52 °C (20 barg)
High Pressure Range (HP): -10 / 120 °C (30 barg)
INGERSOLL RAND D240EC-A
Machine Type: Compressed Air Refrigeration Dryer
Electrical Power: 0,84 kW
Power Supply: 230V / 1 Ph / 50 Hz
Coolant / Refrigerant: R407C (0,40 Kg)
CO2 Equivalent: 0,710 t
Ambient Temperature Range (TS): +2 / +50 °C
Compressed Air Operating Temperature Range (TS): +5 / +60 °C
Compressed Air Maximum Operating Pressure (PS): 16 barg
Low Pressure Range (LP): -15 / 52 °C (20 barg)
High Pressure Range (HP): -10 / 120 °C (30 barg)
STIA DRUCKBEHÄLTER 2000L
Machine Type: Vertical Compressed Air Storage Vessel / Receiver Tank
W+Z ROHRSYSTEM-TECHNIK DTS-40-HPI
Machine Type: High-Temperature Pressure Vessel / Buffer Tank
Maximum Allowable Pressure (PS): 16 bar
Test Pressure (PT): 28.2 bar
W+Z ROHRSYSTEM-TECHNIK DPS-30
Machine Type: Compressed Air Vessel / Pressure Equalization Tank
Maximum Allowable Pressure (PS): 16 bar
Minimum Allowable Pressure (PS): 0 bar
Minimum Allowable Temperature (TS): -10 °C
Maximum Allowable Temperature (TS): 60 °C
Volume (V): 56 L
Test Pressure (PT): 22.9 bar
W+Z ROHRSYSTEM-TECHNIK DPS-20
Machine Type: Compressed Air Vessel / Buffer Vessel
Maximum Allowable Pressure (PS): 16 bar
Minimum Allowable Pressure (PS): 0 bar
Minimum Allowable Temperature (TS): -10 °C
Maximum Allowable Temperature (TS): 60 °C
Volume (V): 34.5 L
Test Pressure (PT): 22.9 bar