Placke QPB-4 150/3100 sheet bending machine
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
Show
+49 162 5858448
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Niederlangen
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Location: DE
Bending Length: 3100 mm
Control Brand: DELEM
Control Model: DA-69T
Pressing Force: 1500 Kn
Control System / Software: Delem DA-69T CNC Control (4 axes)
Maximum Operating Pressure: 300 bar
Distance Between Uprights: 2600 mm
Ram Stroke: 215 mm
Installation Height: 525 mm
Throat Depth: 300 mm
Working Height (without table/tools): 900 mm
Rapid Advance Speed: 150 mm/s
Working Speed: 0 - 9.8 mm/s
Return Speed: 100 mm/s
Stopping Time: 0.15 s
Safety Distance: 270 mm
Ram Dwell Time: 0 - 9.9 s
Drive Power: 11 kW
Voltage / Frequency: 400 V / 50 Hz (3 PEN)
Control Voltage: 24 V DC
Current Rating: 30 A
Fuse Protection: 35 A
Hydraulic Tank Capacity: 270 L
Max. Oil Operating Temperature: 80 °C
X-Axis Travel Range: 600 mm (Max speed: 400 mm/s, Accuracy: +/- 0.02 mm, Motor torque: 1.9 Nm)
R-Axis Travel Range: 200 mm (Max speed: 200 mm/s, Accuracy: +/- 0.05 mm, Motor torque: 1.9 Nm)
Z1-Z2-Z3-Z4 Axis Adjustment Range: 2400 mm (Manual adjustment)
Crowning System: Mechanical crowning system by Wila (0.6 kW, controlled via CNC)
Tool Clamping / System: Wila Modufix
Operating Ambient Temperature: +5 °C to +40 °C
Operating Humidity: 30% to 95% (non-condensing)
* Sheet support arms: 2x 1m, 2x 0.5m
* Punches (Upper Tools): 5x 515mm (28°, H200); 2x 100mm (28°, H200); 1x 200mm (28°, H200); 1x each 20mm, 30mm, 35mm, 40mm (28°, H200); 2x 100mm (28°, H200 with corner notch); 2x 255mm
* Dies (Lower Tools): 5x 515mm (12x30°, R=1, H55); 6x segmented (12x30°, R=1, H55) [Total width 3m]; 4x 515mm; 1x 475mm; 8x segmented [Total width 3m]; 1x 515mm (50x80°, R=5, H55); 1x unspecified; 1x 200mm (V=8, 30°, R=1, H55)
* Tool extensions: 1x 1240mm (H140, L410), 2x 50mm (H100), 4x custom-made (H100)
Safety Speed
Oil Filtration on Filling
Sound Level
Included Accessories & Tooling
* Foot control panel
* Technical documentation (1 set)