Gerstenberg & Agger Margarine Pilot plant Perfector 3x57 other milk processing equipment
Wentorf bei Hamburg
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
Germany, Wentorf Bei Hamburg
Germany, Wentorf Bei Hamburg
Germany, Wentorf Bei Hamburg
Germany, Wentorf Bei Hamburg
Germany, Wentorf Bei Hamburg
Germany, Lübeck
11,200 kg
Lifting height
26 m
Germany
Germany, Oyten
Germany, Wentorf (Hamburg)
Germany, De-49429 Visbek-Rechterfeld
Germany, Wiefelstede
Germany, Remscheid
Germany, Dabergotz
32 m
Germany
Germany, Ampfing
Capacity: up to 90 kg per hour
Products: Margarine
Product pressure: up to 80 bar
Pilot Crystallizers: Yes, 3 pieces
Pilot Pin Rotor: Yes, 1 - 2 - 3 liter
Pilot Inverter: Yes
Resting tube: Yes
Cooling unit: Yes, R22 Freon
Ground surface: 4,35 x 2,10 x 2,15 meter + 2,00 x 1,15 x 1,25 meter
Marke: Gerstenberg & Agger
Margarine pilot plant with 1x high pressure pump
3x crystalizer scrap surface heat exchangers (SSHE)
1x pin worker (1 - 2 and 3 liter)
1x phase inverter
1x cooling unit (R22) and control panel. Working product pressure of the pilot plant up to 80 bar (8000 kPa). Capacity up to 90 kg per hour.High Pressure PumpHigh Pressure Pump for pumping the margarine emulsion through the margarine pilot plant. Gerstenberg & Agger A/S
type Labo Pump 2-22-4
serial number 12.211
product pressure max 80 bar
temperature max 100 °C
capacity max 200 kg/h
motor 415 V - 50 Hz - 1,1 kW. Control panel with Siemens S7-200 PLC.Scraped Surface Heat Exchanger 01
Cooler.Pilot G&A Perfector - SSHE Cooler Perfector 57 is designed for lenient cooling of medium viscosity
pumpable food like margarine. Gerstenberg & Agger A/S
type Perfector Lab 1x57
serial number 12910
duty Margarine. Primary section: design pressure 80 bar
design temperature / max working temperature 40 °C
min working temperature -25 °C
Emulsion. Secondary Chamber: design pressure 15 bar
design temperature / max working temperature 40 °C
min working temperature -25 °C
cooling medium Freon R22. Bulldog knifes. Cooling cylinder length 430 mm and inside diameter 57 mm. Heat transmission surface: 0,057 m3. Volume 1,1 liter. Motor: 415 V - 50 Hz - 4 kW - 1.410 rpm - 15,8/9,2 A and mechanical variator 190-1.000 rpm.Scraped Surface Heat Exchanger 02
Cooler.Pilot G&A Perfector - SSHE Cooler Perfector 57 is designed for lenient cooling of medium viscosity
pumpable food like margarine. Gerstenberg & Agger A/S
type Perfector Lab 1x57
serial number 12910
duty Margarine. Primary section: design pressure 80 bar
design temperature / max working temperature 40 °C
min working temperature -25 °C
Emulsion. Secondary Chamber: design pressure 15 bar
design temperature / max working temperature 40 °C
min working temperature -25 °C
cooling medium Freon R22. Bulldog knifes. Cooling cylinder length 430 mm and inside diameter 57 mm. Heat transmission surface: 0,057 m3. Volume 1,1 liter. Motor: 415 V - 50 Hz - 4 kW - 1.410 rpm - 15,8/9,2 A and mechanical variator 190-1.000 rpm.Scraped Surface Heat Exchanger 03
Cooler.Pilot G&A Perfector - SSHE Cooler Perfector 57 is designed for lenient cooling of medium viscosity
pumpable food like margarine. Gerstenberg & Agger A/S
type Perfector Lab 1x57
serial number 12910
duty Margarine. Primary section: design pressure 80 bar
design temperature / max working temperature 40 °C
min working temperature -25 °C
Emulsion. Secondary Chamber: design pressure 15 bar
design temperature / max working temperature 40 °C
min working temperature -25 °C
cooling medium Freon R22. Bulldog knifes. Cooling cylinder length 430 mm and inside diameter 57 mm. Heat transmission surface: 0,057 m3. Volume 1,1 liter. Motor: 415 V - 50 Hz - 4 kW - 1.410 rpm - 15,8/9,2 A and mechanical disco variator 175-1.000 rpm.Pin worker (1 - 2 - 3 liter). Pilot pin worker is designed for solidification / plasticizing of margarine. Gerstenberg & Agger A/S
type Perfector Labo Pin Rotor Machine
barrel volume: 1 - 2 - 3 liter. Motor: 415 V - 50 Hz - 1,5 kW - 1.420 rpm - 6,9/4 A with mechanical variator1x Inverter. Phase pilot inverter unit / Pilot Microtator for emulsification / cooling of the margarine
high shear between rotor and stator pins incorporates the energy to the product which is necesary for making a stable product. Gerstenberg & Agger A/S
type Pilot Inverter Type P2
serial number 12911
volume 1.1 ltr
product pressure max 80 bar
temperature max 100 °C
motor 415 V - 50 Hz - 4 kW - 1.410 rpm - 5,8/4,2 A with mechanical variator. Holding tube.Adjustable in 3 different lengths with sieve plates.Cooling unit for Freon R22 on a mobile stainless steel frame.Bitzer Kühlmaschinenbau
compressor type 4N.2
serial number 446034
year: 1993
medium R22
fördervol. 27,0 - 57,7 m3/h
pressure 19/25 bar. Motor: 415 V - 50 Hz - 11 kW - 1.455 rpm - 20 A.Accessories.- Stainless steel control panel with Siemens S7-300 PLC
and operation switches.- Stainless steel control panel with all motor groups.- Interconnecting piping for making different connections between the units.- Instruction and spare parts manuals in English