Index G200 metal lathe and milling machine
Weißenfels
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
Germany 
Spain, Barcelona
Germany, Weißenfels
€3,800
≈ $4,251
Germany, Mahlstetten
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
€9,900
≈ $11,070
Germany, Frankenthal
€9,900
≈ $11,070
Germany, Dusseldorf
€5,700
≈ $6,376
Germany, Mahlstetten
€12,600
≈ $14,090
Germany, Mahlstetten
Germany, Kaiserslautern
Germany, Kaiserslautern
INDEX
Model
G200
Year
2017
Observations
Twin-Spindle CNC Lathe
Operating hours: 52,890 h
Maximum turning length: 200 mm
INDEX MBL Bar Feeder
Husillo principal
Spindle clamping diameter: 42 mm
Spindle diameter on front bearing: 85 mm
Control CNC
· Control system: Siemens SINUMERIK
· Display: 24" color flat panel
Husillo principal
· Bar Width: Ø 42 mm
· Maximum speed: 7,000 rpm
· Maximum power: 13 kW
· C-Axis: Yes
· Clamping cylinder:
oD60/20 for gripper and chainring
oSingle clamping pressure device
Contrahusillo
· Bar Width: Ø 42 mm
· Maximum speed: 7,000 rpm
· Maximum power: 13 kW
· C-Axis: Yes
· Clamping cylinder:
oD42 for gripper and chainring
oSingle clamping pressure device
Cross Carriage 1 (Top) - X/Z Axles (Y, B)
· Tool holder:
o14 stations
oVDI 25
oPower Tools
· Configuration: V-guide with W-serrations
· Routes:
oX = 155 mm
oZ = 590 mm
· Fast forward:
oX = 20 m/min
oZ = 30 m/min
· Measuring system:
oX-axis optical ruler
oZ-axis encoder
· Tool Drive:
oDual clutch system
Cross Carriage 2 (Lower Right) - X/Z Axes
· Tool holder:
o14 stations
oVDI 25
oPower Tools
· Configuration: V-guide with W-serrations
· Routes:
oX = 105 mm
oZ = 400 mm
· Fast forward:
oX = 22 m/min
oZ = 45 m/min
· Measuring system:
oX-axis optical ruler
oZ-axis encoder
· Tool Drive:
oWAN system with clutch
Electrical installation (CNC plate - 12/2017)
· Rated voltage: 400 V
· Frequency: 50 Hz
· Control voltage: 24 V
· Rated current: 68 A
· CE Marking: Yes