VL1000 machining centre
Marinha Grande
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+351 966 99...
Show
+351 966 999 459
+34 619 02 ...
Show
+34 619 02 07 05
Portugal 
Portugal, Marinha Grande
Portugal, Marinha Grande
Portugal, Marinha Grande
Portugal, Marinha Grande
Portugal, Marinha Grande
Portugal, Marinha Grande
Portugal, Marinha Grande
Portugal, Marinha Grande
Portugal, Marinha Grande
Portugal, Marinha Grande
Portugal, Marinha Grande
Portugal, Ramalhal
Portugal, Marinha Grande
Portugal, Marinha Grande
Portugal, Marinha Grande
Portugal, Marinha Grande
Portugal, Marinha Grande
Portugal, Marinha Grande
Portugal, Marinha Grande
Portugal, Marinha Grande
ATC Type: Doppelgreifer
Axle: 15,000 rpm / BBT40
Controller: Fagor
Coolant through the shaft: 30 bar/435 psi
Course: (X, Y, Z) 1350 x 950 x 600 mm
cutting feed rate: 1~ 20,000mm/min
Distance between columns: 850 mm
Distance from spindle nose to table: 200~900mm
Distance from spindle tip to table: 150 x 760 mm
Distance from the spindle tip to the table: 150 x 760 mm
Electric power consumption: 50/125 kVA/A
Fast displacement rate: (X, Y, Z) 30 / 30 / 30 m/min
Fast traversal (X/Y/Z): 30 x 30 x 30 m/min
Hours: 14524
Hours: 14524
Machine Net Weight: 5.500 kg
Magazine capacity: 24
Maximum load: 1200 kg
Maximum shaft torque: 143.04 Nm
Maximum tool length: 300 mm
Maximum tool weight: 7 kg
Max. Load: 6.000 kg
Max Tool Diameter: 75/148mm
Max. Tool Length: 300 mm
Max. Tool weight: 7 kg
Operating dimensions: 4863x5205x3980mm
Power S1/S6: 7.5 / 11 kW
Quantity in Stock: 1
S1/S6 Power: 7.5 / 11 kW
spindle cone: TAPERED BT40
spindle speed: 8000 rpm
table size: 1900 x 1300 mm
Table work surface: 1300 x 600 mm
Tools: 24
Torque S1/S6: 63.7 / 89.4 Nm
T-Slots: 5 x 18 x 100 mm
T-Slot Size: 8 x 22 in 160 mm
Type: belt
Weight: 20000kg
X axis: 1200 mm
Y axis: 610 mm
Z axis: 610 mm
MANFORD VL1000 machining center