Vitap Point K2 TOP 2.0 machining center for wood
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
+49 162 5858448
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Location: NL
Spindle Power: 5 kW
Condition: not rebuilt, without warranty
X-axis: uninterrupted workpiece transport via DDT (Dual Dynamic Transport System) with brushless motor
Y-axis: drilling head travel
Z-axis: drilling
Spindle speed (additional spec): 3500 rpm
Max vertical drilling depth: 45 mm
Max horizontal drilling depth (X/Y): 30 mm
Max workpiece weight: 80 kg
Max workpiece size: X unlimited, Y 1200 mm, Z 50 mm
Min workpiece size: X 270 mm, Y 185 mm (70°), Z 4 mm
Feed rate: 25 m/min
Dust extraction air volume: 2000 m³/h
Exhaust speed: 30 m/s
Exhaust ports: 2x Ø 100 mm + 1x Ø 50 mm
Motor: 1.7 kW
Compressed air: 7 bar
Max air consumption: 60 Nl/min
CE compliant
Machining and axes
Continuous machining
machining from below
automatic return of workpiece to operator
3 controlled axes
No workpiece length limitation
Rear workpiece exit
Referencing and positioning
Dual “0” reference laser (transmitter/receiver) for start/end detection
compensates for dark-edged materials
Program readjustment for drilling from below for flushness on vertical/horizontal workpieces
Side stops with rollers (fixed and movable)
mechanical digital readout
automatic alignment to 0-stop
removal up to 3 mm on the 0-line
Constant side clamping device for precise positioning on the 0-line
Adjustable zero point for 4-sided formatting
Tooling and heads
Automatic 4-station tool changer
12 independent vertical spindles
Horizontal spindles
X-axis: (2+2)
Y-axis: (2+2)
1 saw (Ø 100 mm)
5 kW electrospindle
ISO 30 taper
12,000–24,000 rpm
Capacities
Control and software on machine
19" 5/4 TFT LCD monitor
Industrial PC
WSC operator interface with Lister
parametric tooling
and parametric setup
CAD TPA EDI32 graphical programming
basic version
USB port
Saving of all files
Macro programming
Import of DXF files
Utilities and extraction interface
CE STANDARDS
Additional equipment
Office software – License