Arburg Allrounder 920S 5000-3200+ robot + conveyor belt injection moulding machine
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
+49 162 5858448
50 Hz
Germany, Weißenfels
Germany, Gräfelfing
Germany, Weißenfels
50 Hz
Germany, Weißenfels
Germany, Gräfelfing
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Gräfelfing
Location: DE
Maximum mold opening force: 150 kN
Enhanced opening force: 100 / 1,000 kN
Opening stroke: up to 900 mm
Mold height: min. 400 – max. 1,050 mm
Distance between platens: 1,300 – 1,950 mm
Tie-bar spacing (H × V): 920 × 920 mm
Platen size (W × H): 1,280 × 1,280 mm
Movable platen weight (half): max. 8,000 kg
Ejector force: max. 800 kN
Ejector stroke: max. 250 mm
Hydraulic pump motor power: 75 kW
Dry cycle time (opening stroke 5): 4.5–6.44 s
Installed total power: 96 kW
Control cabinet safety standard: DIN EN 60204
Socket combination: 1 × Schuko, 1 × CEE
Screw diameters: 70 / 80 / 90 mm
Effective screw length (L/D): 23 / 20 / 18
Maximum shot volume: 1,232 / 1,608 / 2,036 cm³
Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g
Plasticizing capacity (PS): 185 / 215 / 250 kg/h
Maximum injection pressure: 2,500 / 2,000 / 1,580 bar
Without accumulator: 290 / 380 / 482 cm³/s
With accumulator: 1,188 / 1,552 / 1,964 cm³/s
Holding pressure: max. 350 / 200 bar
Screw speed: 47 / 54 / 61 rpm
Screw torque: 3,500 Nm
Nozzle contact force: max. 110 kN
Nozzle stroke: max. 675 mm
Installed barrel heating power: 6 × 5,500 + 4,300 W
Installed nozzle heating power: 1,100 W
Oil fill volume: 590 liters
Motor + heating fuse rating: 200 A
Motor fuse: 125125 A
Heating fuse: 63 A
Hydraulics / Drive
Injection Unit
Injection rate