LQ15V00004F1 final drive for Kobelco SK220-5 midi excavator
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+86 189 289...
+86 189 2896 5241
China
China
China
China
China
Product Overview
The Kobelco SK220‑5 is an older 22‑ton machine that has put in years on general excavation, site prep and utility work — the kind of workhorse owners keep running long after the warranty has expired because it simply does the job. Under each track frame, the travel motor assembly, reference LQ15V00004F1, takes pump flow and turns it into the slow, torque‑rich rotation pulling the machine across rutted, uneven ground.
On a high‑hour ‑5 series Kobelco, the drive wears down in quiet stages. The operator notices the two tracks no longer quite keep pace, that the machine drifts on level ground, and that a new warmth comes through the track frame after a longer run. Left alone, a track eventually hesitates rather than pulls — by then the piston group and reduction gears are already scoring each other. This OEM‑grade unit reproduces the original motor‑and‑reducer pairing as one sealed, bench‑tested assembly, so the worn drive lifts out whole and the new one bolts straight back in.
Core Advantages
1. Keeps an older Kobelco earning rather than parked
Original LQ15V00004F1 drives for the ‑5 series grow harder to source as the fleet ages. This OEM‑grade unit gives owners a dependable path to keep a still‑useful machine on the job.
2. A piston group that holds pressure under load
The cylinder block, piston shoes and valve plate are finished to close clearance, so oil pressure does not bleed internally. Both tracks pull in step — no drift, no lazy side, no hesitation when the bucket loads up.
3. Hardened gears for decades‑proven duty
The planetary gear set follows a long‑proven Kobelco layout, with case‑hardened teeth that share the drive load evenly. Meshing stays smooth and quiet, and wear from years of track push slows right down.
4. Sealed for the dust and water of old‑site work
Older machines work through long shifts in quarry dust, mud and standing water. Fresh shaft and housing seals keep that grit out of the lube — the protection that decides whether the drive reaches its next overhaul.
5. A direct, drop‑in fit
Flange, studs and ports reproduce the original, so removal and refitting follow the old Kobelco manual. No adapters, no fabrication, no guessing.
Manufacturing & Quality Control
Parts are machined to Kobelco print, heat‑treated at wear points, and assembled in a clean shop. Each finished drive runs on a hydraulic stand while torque, leakage and noise are logged; units outside spec are reworked before packing. The internals are fogged with preservation oil, ports are plugged, and the assembly ships on shock‑absorbing dunnage.
Frequently Asked Questions
Q1: Will this fit other SK‑series models?
A: The LQ15V00004F1 platform appears across the SK220 range, but mounting and porting can vary by year. Send the machine serial number and we will confirm before you order.
Q2: How should the drive be stored before fitting?
A: Keep it in its sealed crate, off the ground and out of direct sun. The preservation oil and plugged ports protect the internals for months, but do not unwrap it until you are ready to install.
Q3: What is the recommended break‑in procedure?
A: Avoid full‑load reversing on grades for the first shift. Let the tracks cycle under light load so the new gears and seals seat, then check oil level and fittings after the first day.
Q4: Do you supply a fitting gasket or seal kit?
A: The drive arrives with its own shaft and housing seals fitted. If you need a separate gasket kit for the mounting joint, mention it on the order and we will include one.
Q5: What shipping options are available?
A: We ship by sea, air or express courier depending on urgency. Sea is the most economical for a unit this size; air freight is available but costs more. Tell us the destination port or address and we will quote.