Turchi 300F – 1200J pile driver for rent
Foggia
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+39 344 726...
Show
+39 344 726 0561
Netherlands, Etten-Leur
Poland, Warsaw
27 m
Netherlands, Etten-Leur
Yanmar 4-cylinder engine, 2,190 cm³, 34.4 kW at 3000 rpm.
Open-circuit proportional hydraulic system, 180 bar pressure, gear pump, 140-liter oil tank.
Indeco hammer 950/1200 J, frequency 570–1180 blows/min, oil flow 70–100 L/min, pressure 170 bar.
Side tilt ±9.5°, front tilt +10° / -51°, translation 130+130 mm, hammer stroke 620 mm.
Included: column extension (4400/5200/6000 mm), smooth hammer tip, upper ring, lower post centering guide, hammer protection, 4-hook lifting chain.
Available options: GPS, automatic verticality, remote control, steel tracks with rubber pads, hydraulic corer, ground-screw system.
Brand-new CE-certified machine, available on order. Delivery throughout Europe and full after-sales support.
Motor Yanmar 4 válce, 2.190 cm³, 34,4 kW při 3000 ot/min.
Proporcionální hydraulika v otevřeném okruhu, tlak 180 bar, zubové čerpadlo, nádrž 140 l.
Kladiivo Indeco 950/1200 J, 570–1180 úderů/min, průtok 70–100 l/min, tlak 170 bar.
Boční náklon ±9,5°, přední +10°/-51°, posuv 130+130 mm, zdvih kladiva 620 mm.
Součástí: prodloužení sloupu (4400/5200/6000 mm), hladká hlava, horní kroužek, spodní centrování, ochrana kladiva, 4-háčkový řetěz.
Volitelné: GPS, automatická vertikalita, dálkové ovládání, ocelové pásy, hydraulická jádrová vrtačka, zemní šroubový systém.
Nový stroj s certifikací CE, dostupný na objednávku. Doprava po celé Evropě.
Yanmar 4-Zylinder-Motor, 2.190 cm³, 34,4 kW bei 3000 U/min.
Proportionales Hydrauliksystem im offenen Kreislauf, 180 bar Druck, Zahnradpumpe, 140-Liter-Öltank.
Indeco-Hammer 950/1200 J, Schlagfrequenz 570–1180 Schläge/Min., Ölfluss 70–100 L/Min., Druck 170 bar.
Seitliche Neigung ±9,5°, Frontneigung +10° / -51°, Verschiebung 130+130 mm, Hammervorschub 620 mm.
Inklusive: Säulenverlängerung (4400/5200/6000 mm), glatte Hammerplatte, oberer Ring, untere Pfahlzentrierung, Hammer-Schutz, 4-Haken-Hebekette.
Optionen: GPS, automatische Vertikalität, Fernbedienung, Stahlketten mit Gummipolstern, hydraulischer Kernbohrer, Schraubsystem für Erdanker.
Neue CE-zertifizierte Maschine, lieferbar auf Bestellung. Lieferung in ganz Europa und umfassender Kundendienst.
Motor Yanmar de 4 cilindros, 2.190 cm³, 34,4 kW a 3000 rpm.
Sistema hidráulico proporcional de circuito abierto, presión 180 bar, bomba de engranajes, depósito de aceite de 140 litros.
Martillo Indeco 950/1200 J, frecuencia 570–1180 golpes/min, caudal 70–100 L/min, presión 170 bar.
Inclinación lateral ±9,5°, inclinación frontal +10° / -51°, traslación 130+130 mm, carrera del martillo 620 mm.
Incluye: extensión de columna (4400/5200/6000 mm), punta lisa, anillo superior, centrador inferior, protección del martillo, cadena de elevación de 4 ganchos.
Opcionales: GPS, verticalidad automática, radiocontrol, orugas de acero con zapatas de goma, perforadora hidráulica, sistema de tornillos para terreno.
Máquina nueva con certificación CE, disponible bajo pedido. Envíos a toda Europa y servicio postventa.
Moteur Yanmar 4 cylindres, 2.190 cm³, 34,4 kW à 3000 tr/min.
Système hydraulique proportionnel en circuit ouvert, pression 180 bar, pompe à engrenages, réservoir d’huile 140 litres.
Marteau Indeco 950/1200 J, fréquence 570–1180 coups/min, débit d’huile 70–100 L/min, pression 170 bar.
Inclinaison latérale ±9,5°, inclinaison avant +10° / -51°, translation 130+130 mm, course du marteau 620 mm.
Inclus : rallonge de colonne (4400/5200/6000 mm), tête lisse, anneau supérieur, centreur inférieur, protection du marteau, chaîne de levage à 4 crochets.
Options : GPS, verticalité automatique, radiocommande, chenilles en acier avec patins en caoutchouc, carotteuse hydraulique, système de vissage au sol.
Machine neuve certifiée CE, disponible sur commande. Livraison dans toute l’Europe et assistance après-vente.
Yanmar 4 hengeres motor, 2.190 cm³, 34,4 kW 3000 ford./perc-nél.
Nyitott körű arányos hidraulikarendszer, 180 bar, fogaskerék-szivattyú, 140 liter olajtartály.
Indeco kalapács 950/1200 J, 570–1180 ütés/perc, olajáram 70–100 L/perc, nyomás 170 bar.
Oldaldőlés ±9,5°, elől +10°/-51°, eltolás 130+130 mm, 620 mm lökethossz.
Tartozékok: oszlophosszabbító (4400/5200/6000 mm), sima fej, felső gyűrű, alsó központosító, kalapácsvédelem, 4 ágú emelőlánc.
Opcionálisan: GPS, automatikus függőlegesség, távvezérlés, acéllánctalpak, hidraulikus magfúró, földcsavarrendszer.
Új, CE-tanúsítvánnyal rendelkezik, rendelésre elérhető. Szállítás egész Európában.
Motore Yanmar 4 cilindri, 2.190 cm³, 34,4 kW a 3000 rpm.
Impianto idraulico proporzionale a circuito aperto, pressione 180 bar, pompa ad ingranaggi, serbatoio olio 140 litri.
Martello Indeco 950/1200 J, frequenza 570–1180 colpi/min, portata olio 70–100 L/min, pressione 170 bar.
Inclinazione laterale ±9,5°, inclinazione frontale +10°/-51°, traslazione 130+130 mm, uscita martello 620 mm.
Inclusi: prolunga colonna (4400/5200/6000 mm), mazza liscia, anello superiore, centra palo inferiore, protezione martello, catena a 4 ganci.
Disponibili: GPS, verticalità automatica, radiocomando, cingoli in acciaio, carotatrice idraulica, sistema avvitamento vitoni.
Macchina nuova, certificata CE, pronta per consegna su ordinazione. Trasporto in tutta Europa e assistenza post vendita.
Yanmar 4-cilindermotor, 2.190 cm³, 34,4 kW bij 3000 tpm.
Open-circuit proportioneel hydraulisch systeem, 180 bar, tandwielpomp, olietank 140 liter.
Indeco hamer 950/1200 J, 570–1180 slagen/min, 70–100 L/min olieflow, 170 bar.
Zijwaartse helling ±9,5°, fronthelling +10°/-51°, verplaatsing 130+130 mm, slaglengte 620 mm.
Inclusief: kolomverlenging (4400/5200/6000 mm), vlakke kop, bovenring, ondercentreerring, hamerbescherming, 4-haaks hijsketting.
Opties: GPS, automatische verticaliteit, afstandsbediening, stalen rupsen, hydraulische kernboor, grondschoefsysteem.
Nieuwe CE-gecertificeerde machine, leverbaar op bestelling. Levering in heel Europa.
Silnik Yanmar 4-cylindrowy, 2.190 cm³, 34,4 kW przy 3000 obr./min.
Hydraulika proporcjonalna w układzie otwartym, ciśnienie 180 bar, pompa zębata, zbiornik oleju 140 l.
Młot Indeco 950/1200 J, częstotliwość 570–1180 uderzeń/min, przepływ 70–100 l/min, ciśnienie 170 bar.
Pochylenie boczne ±9,5°, przednie +10° / -51°, przesuw 130+130 mm, skok młota 620 mm.
W zestawie: przedłużenie kolumny (4400/5200/6000 mm), gładka końcówka, pierścień górny, dolny centrujący, osłona młota, łańcuch 4-hakowy.
Opcje: GPS, automatyczna pionowość, pilot, stalowe gąsienice z gumowymi nakładkami, wiertnica hydrauliczna, system wkręcania śrub gruntowych.
Nowa maszyna z certyfikatem CE, dostępna na zamówienie. Transport w całej Europie i wsparcie posprzedażowe.
Motor Yanmar 4 cilindros, 2.190 cm³, 34,4 kW a 3000 rpm.
Sistema hidráulico proporcional de circuito aberto, 180 bar, bomba de engrenagens, reservatório 140 L.
Martelo Indeco 950/1200 J, frequência 570–1180 golpes/min, fluxo 70–100 L/min, pressão 170 bar.
Inclinação lateral ±9,5°, frontal +10° / -51°, translação 130+130 mm, curso 620 mm.
Inclui: extensão de coluna (4400/5200/6000 mm), ponta lisa, anel superior, centrador inferior, proteção do martelo, corrente de elevação de 4 ganchos.
Opcionais: GPS, verticalidade automática, controlo remoto, lagartas de aço, perfuradora hidráulica, sistema de parafuso ao solo.
Máquina nova certificada CE, pronta mediante encomenda. Entrega em toda a Europa e apoio pós-venda.
Motor Yanmar 4 cilindri, 2.190 cm³, 34,4 kW la 3000 rpm.
Sistem hidraulic proporțional în circuit deschis, 180 bar, pompă cu roți dințate, rezervor 140 litri.
Ciocan Indeco 950/1200 J, frecvență 570–1180 lovituri/min, debit 70–100 L/min, presiune 170 bar.
Înclinare laterală ±9,5°, frontală +10°/ -51°, translație 130+130 mm, cursă 620 mm.
Include: prelungire coloană (4400/5200/6000 mm), vârf neted, inel superior, centru inferior, protecție ciocan, lanț 4 cârlige.
Opționale: GPS, verticalitate automată, telecomandă, șenile de oțel, carotieră hidraulică, sistem de șuruburi de sol.
Mașină nouă, certificată CE, disponibilă la comandă. Livrare în toată Europa.